7-26.
You are copying charts to 35mm
color slides on an MP-4 copy
camera.
The right-rear lamp burns
out.
What lamp(s) should you
replace?
1.
The right-rear lamp only
2.
The right-rear and the
right-front lamps only
3.
The right-rear and the
left-rear lamps only
4.
All four lamps
7-27.
What type of film should you use
to copy a black-and-white line
original?
1. Kodalith
2. Plus-X
3. HP5 Plus
4. XP2
7-28.
Which, if any, of the following
types of film should you use to
make a black-and-white copy of
a colored line original?
1.
Colorblind
2.
Orthochromatic
3.
Panchromatic
4.
None of the above
7-29.
To copy a black-and-white
continuous-tone original,
you should use which of the
following films??
1.
Kodalith
2.
Contrast Process Pan
3.
Kodak Commercial
4.
Tri-X
7-30.
Which of the following films should
you use to produce a color negative
of a color photographic print?
1.
Vericolor III Professional
2.
Kodak Internegative
3.
Ektachrome
4.
Kodacolor
7-31
7-32
.
You are printing a number of color
prints that will later be copied to
color slides.
What surface paper
should you use to make the prints?
1.
Glossy
2. Matte
3.
Semimatte
4.
Pearl
.
At what angle to the original
should the copy lights be
positioned for general, routine
copy work?
1. 90°
2. 45°
3. 30°
4. 10°
7-33.
You have produced a copy negative
that you know was lighted evenly,
but the negative still has less
density at the edges than at the
center.
What factor most probably
caused this problem?
1.
A wide-angle lens was used
2.
A telephoto lens was used
3.
The film was overexposed
4.
The film was underexposed
7-34.
What type of film requires
the most critical exposure?
1.
High contrast
2.
Moderate contrast
3.
Normal contrast
4.
Low contrast
7-35.
Many bright reflections are
occurring from high points of
brush strokes on an oil painting
that you are copying.
What may
be the end result?
1.
Increased contrast
2.
Reduced contrast
3.
Underexposure
4.
Overexposure
51